All insights
YOTTechnology· 6 min read

Published

Wi-Fi 6 vs Wi-Fi 7: which should a business buy?

Short answer: for a new business network in 2026, specify Wi-Fi 7 access points, because they cost the same installation effort, support every older client and add 6 GHz capacity. Wi-Fi 6 remains a reasonable choice for expanding an existing Wi-Fi 6 estate, for low-density sites, or where the switches cannot supply the extra power and uplink speed Wi-Fi 7 needs.

Ceiling-mounted Wi-Fi access point above a modern open-plan office
Best for new builds
Wi-Fi 7
Europe 6 GHz band
5945–6425 MHz
Wired side
Multi-gig switching, PoE
Wi-Fi 6 still fits
Small or existing estates

What actually changes

Wi-Fi 7 keeps everything Wi-Fi 6 introduced (OFDMA, target wake time, WPA3) and adds three things buyers notice: access to 6 GHz, wider channels and multi-link operation (MLO), which lets a client hold links on more than one band for steadier connections.

Wi-Fi 6 and Wi-Fi 7 side by side
CriterionWi-Fi 6 (802.11ax)Wi-Fi 7 (802.11be)
Bands2.4 and 5 GHz (6 GHz only with Wi-Fi 6E)2.4, 5 and 6 GHz
Widest channel160 MHz320 MHz
Modulation1024-QAM4096-QAM
Multi-link operationNoYes: one client can use several bands at once
6 GHz in EuropeNot available on plain Wi-Fi 65945–6425 MHz, indoor low-power use
Older clientsSupportedSupported

The European 6 GHz detail most guides miss

US articles describe 1,200 MHz of 6 GHz spectrum. Europe harmonises 480 MHz (5945–6425 MHz), mainly for low-power indoor use. That leaves room for only one 320 MHz channel, so in offices, hotels and vessel interiors you will usually plan 80 or 160 MHz channels and gain capacity from clean spectrum rather than headline speed.

See our guide to European versus US 6 GHz rules and the Wi-Fi 7 deployment page.

When Wi-Fi 6 is still enough

Wi-Fi 6 remains sensible when:

  • you are adding access points to an existing Wi-Fi 6 estate and want one controller and configuration
  • the site is low-density, such as a small office or warehouse with a few scanners
  • switches are limited to 1 Gb uplinks or a tight PoE budget
  • most client devices will not support 6 GHz within the network's lifetime

What to check before you buy Wi-Fi 7

A Wi-Fi 7 access point only delivers if the wired side keeps up:

  • multi-gigabit (2.5 Gb or faster) switch ports for the access points
  • PoE budget per port and per switch, from the access point datasheet
  • 6 GHz and WPA3 support on your priority laptops and phones
  • the European country profile set on the controller
  • a survey that models 6 GHz coverage separately from 5 GHz

Our device compatibility guide covers the client side in more detail.

Our recommendation

New build or full refresh: Wi-Fi 7, planned on European 6 GHz rules, with multi-gigabit switching. Small extension of a working Wi-Fi 6 network: stay on Wi-Fi 6 and plan the move at the next refresh. If you are unsure, send us the floor plan and device list and we will quote both options.

Frequently asked questions

Is Wi-Fi 7 worth it over Wi-Fi 6 for a business?
For a new network, yes: Wi-Fi 7 access points support older clients and add 6 GHz capacity and multi-link operation. For a small extension of an existing Wi-Fi 6 network, Wi-Fi 6 is usually enough.
Do Wi-Fi 6 devices work on a Wi-Fi 7 network?
Yes. Wi-Fi 7 access points are backward compatible, so Wi-Fi 6 and older devices connect on 2.4 or 5 GHz at their own speeds.
Can I use 320 MHz channels in Europe?
Europe allows 480 MHz of 6 GHz spectrum (5945–6425 MHz), which fits only one 320 MHz channel. Most multi-access-point sites use 80 or 160 MHz channels instead.
Do I need new switches for Wi-Fi 7?
Often. Wi-Fi 7 access points usually need multi-gigabit uplinks and more PoE than older models, so check switch port speed and power budget before ordering.

Continue the topic

Need this specified for a project?

Talk to the YOT team about your requirements.